In Stock Add to Cart
Coming Soon
Out of Stock
${{ data.B2cBuyPrice|number:2}}

Designed For


Protect your iPhone without the bulk. iGlaze Armour is a hardshell case with a diamond-cut aluminum back and polycarbonate frame. It's stealth protection that's simply stunning. Your iPhone is protected from scratches and shocks and the unique metallic finish provides a slick look and feel. iGlaze Armour is flash-friendly and all buttons and ports are easily accessed.


  • Slim profile protection with a diamond-cut aluminum backplate.
  • All buttons remain easily accessible while resting in iGlaze Armour.
  • Includes a backside buffer film for extra protection against dust and debris.


  • {{size.SpecName}}
  • {{size.SpecName}}
  • Available In

  • {{data.FirstCapitalColorName}}
  • Compatibility

    • {{comp}}
  • Product Name

    iGlaze Armour Metal Case for iPhone 5/5s

  • {{spec.SpecName}}
  • {{spec.SpecName}}


iGlaze Armour Installation

Tilt your iPhone at an angle while aligning the left side of the iPhone with the opening for the iPhone buttons. Slowly lower the right side of the iPhone and apply pressure until the entire iPhone clicks into place.

  • Step

iGlaze Armour Removal

Hold the iPhone with iGlaze Armour firmly in your right hand with right thumb pressed against the right side of iGlaze Armour. Use your left hand to gently pull the iPhone out of the casing by lifting the right side of the iPhone.

  • Step

Backside Buffer film Installation

The backside buffer film is located between two stickers (marked #1 and #2). Please follow the instructions below to apply the film to your iPhone's backside.

  • Use the provided microfiber cloth to wipe away any dust particles on the backside of the iPhone.
  • Peel off backing #1 (as marked) facing down to avoid any dust particles adhering to the film's surface.
  • Apply the buffer film by aligning against all four sides of the iPhone.
  • Use the microfiber cloth to smooth out the buffer film during the installation.
  • Peel off backing #2 (as marked) and use the microfiber cloth to squeeze out any air bubbles toward the sides.

*Note: dust particles that accidentally fall on the buffer film during installation will cause bubbles and can be easily removed with scotch tape.